Specifications

226
11.1.2 Mroute Table
On this page you can get the desired mroute information through different search options.
Choose the menu Multicast Routing→Global Config→Mroute Table to load the following page.
Figure 11-2 Mroute Table
The following entries are displayed on this screen:

Search Option
All: Select All to display all entries.
Group: Select Group and enter the group of desired entry.
Source: Select Source and enter the source of desired entry.
Incoming Interface:
Sele
ct Incoming Interface and enter the incoming interface of
desired entry.

Mroute Table
Group: The destination group IP address.
Source:
The IP address of the multicast packet source to be combined
with the Group IP to fully identify a single route whose M
route
table entry.
Incoming Interface:
The incoming interface on which multicast packets for this
source/group arrive.
Uptime: The time in seconds since the entry was created.
Expires:
The time in seconds before this entry will age out and be
removed from the table.
RPF Neighbor: The IP address of the Reverse Path Forwarding neighbor.
Protocol:
The multicast routing protocol which created this entry. The
possibilities are PIM DM and PIM SM.
Flags: The value displayed in this field is valid if the multicast
routing
protocol running is PIM
SM. The possible values are RPT or
SPT. For other protocols an "------" is displayed.
Detail: Displays the detailed information of the mroute entries.
Outgoing Interface: Displays the outgoing interfaces on which mul
ticast packets
for this source/group are forwarded.