Specifications

207
Advertise: Set whether or not the address range
will be redistributed to
OSPF domain via an AS-External LSA. The default is Enable.

ASBR Aggregation Table
Process: Select one OSPF Process to display its address range list.
Select: Select the desired item for configuration. It is multi-optional.
IP Address: Displays the IP address of the address range.
Subnet Mask: Displays the subnet mask of the address range.
Tag:
Displays the tag value in redistributed address range and it
can be modified.
NSSA Only: Displays the NSSA-Only parameter and it can be modified.
Advertise: Displays the Advertise parameter and it can be modified.
10.9.10 Neighbor Table
Choose the menu Routing→OSPF→Neighbor Table to load the following page.
Figure10-55 Neighbor Table
The following entries are displayed on this screen:

Neighbor Table
Process: Select one OSPF Process to display its neighbor list.
Interface:
Displays the interface for which neighbor list is to be
displayed.
Neighbor IP
Address:
The IP address of the neighboring ro
uter's interface to the
attached network.
Router ID:
A 32 bit integer in dotted decimal format representing the
neighbor.
Area ID: The area ID of the OSPF area associated with the interface.
Options: An integer value that indicates the optional OSPF cap
abilities
supported by the neighbor. The neighbor's optional OSPF
capabilities are also listed in its Hello packets.
Router Priority: The router priority of the neighbor.