User Guide Smart Wi-Fi Light Switch, 3-Way Kit HS210 KIT 1910012319 REV1.0.
Contents About This Guide····································································· 1 Introduction················································································ 2 Appearance················································································ 3 Set Up Your Smart 3-Way Switch Kit···························· 4 Main Pages·················································································· 6 Configure Your Smart 3-Way Switch Kit····················· 7 Crea
About This Guide This guide provides a brief introduction to Smart 3-Way Switch Kit and the Kasa app, as well as regulatory information. Please note that features of Smart 3-Way Switch Kit may vary slightly depending on the model and software version you have, and on your location, language and internet service provider. All images, parameters and descriptions documented in this guide are used for demonstration only.
Introduction 3-Way Switching, where a light is controlled from two switch locations, is common in hallways, stairs, and living rooms. 3-Way Switch wiring can be complex, but TP-Link’s Smart 3-Way Switch Kit makes it an easy smart home upgrade and provides control from anywhere, scheduling, and much more. The Kit includes 2 smart switches specially designed for 3-way switch wiring. The free Kasa app provides step-by-step instructions for wiring your switches and connecting them to your home Wi-Fi network.
Appearance Smart 3-Way Switch Kit has two LEDs that changes color according to its status, a RESTART button and a RESET button. See the explanation below: Blinking Amber and Green App-Config mode initiated. Green Lit up for about 30 seconds when connected to the Wi-Fi network, then turns off. Blinking Amber Resetting. Red No Wi-Fi connection. White Lit up when the light is switched OFF to show the Smart Switch location in the dark. RESTART RESET Press to reboot the Smart Switch.
Set Up Your Smart 3-Way Switch Kit Follow the steps below to set up your Smart 3-Way Switch Kit via Kasa for Mobile app. 1. Download and install Kasa app Go to Google Play or the Apple App Store or scan the QR code below to download the Kasa app on your Android or iOS smartphone or tablet. 2. Log in or sign up with TP-Link ID Open the app. Use your TP-Link ID to log in. If you don’t have a TP-Link ID, tap Create Account and the Kasa app will guide you through the rest. 3.
Set Up Your Smart 3-Way Switch Kit Follow the steps below to set up your Smart 3-Way Switch Kit via Kasa for Mobile app. 4. Wire your new smart switch kit Follow the Kasa app instructions to wire your smart switch kit with the 3-Way wiring method. Then install and secure both switches after the wiring. 5. Set up and pair both switches With your smart switch kit secured, set up your first switch and then pair your second one. Make sure they control the same light. 6.
Main Pages After you successfully set up your Smart 3-Way Switch Kit, you will see the home page of the Kasa app. Here you can view the working status of all devices that you've added to Kasa and manage them. Tap on a smart switch to check the current status and runtime of your smart switch kit.
Configure Your Smart 3-Way Switch Kit On Device Status page, you can set Schedule, preset Away Mode, set Timer and change the settings of your smart switch kit. Set Schedule Tap to set a schedule for your smart switch kit to simplify your daily routine by creating automatic On/Off action. Preset Away Mode Tap to preset the Away Mode and your smart switch kit will be randomly turned on/off during this time.
Configure Your Smart 3-Way Switch Kit On Device Status page, you can set Schedule, Away Mode, Timer and change the settings of your smart switch kit. Set Timer Tap to set the time to turn your smart switch kit on or off after specific times. Device Settings Tap to view and change the settings of your smart switch kit.
Create Scenes A scene is a preset group of smart devices that can be programmed, customized and activated simultaneously at the touch of a button from your smartphone or tablet, allowing you to easily set your mood, activity or fit any special occasion. This page allows you to preset how your smart home devices should act automatically at special occasions.
Connect to Amazon Alexa or Google Home Connect your Smart 3-Way Switch Kit to Amazon Alexa or Google Home to enjoy a full hands-free experience - control your lights by voice commands. Follow a method below to connect your Smart 3-Way Switch Kit to Amazon Alexa or Google Home. Method 1: Launch Kasa app and go to Add Device > WORKS WITH KASA > Amazon Alexa / Google Assistant for detailed instructions. Method 2: Visit FAQs on the TP-Link official website for detailed instructions: Google Assistant: www.
Authentication COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-Link Technologies Co., Ltd. Copyright © 2018 TP-Link Technologies Co.
FCC compliance information statement Product Name: Smart Wi-Fi Light Switch, 3-Way Kit Model Number: HS210 Responsible party: TP-Link USA Corporation, d/b/a TP-Link North America, Inc. Address: 145 South State College Blvd. Suite 400, Brea, CA 92821 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations.
Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: 1. This device may not cause interference, and 2. This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1.
BSMI Notice 安全諮詢及注意事項 • 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 • 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 • 注意防潮，請勿將水或其他液體潑灑到本產品上。 • 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。 • 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。 • 請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。 限用物質含有情況標示聲明書 限用物質及其化學符號 產品元件名稱 鉛 Pb 鎘 Cd 汞 Hg 六價鉻 CrVI PCB ○ ○ ○ ○ 外殼 ○ ○ ○ ○ 備考 1. " 超出 0.1 wt %" 及 " 超出 0.01 wt %" 系指限用物質之百分比含量超出百分比含量基準值。 備考 2.
• CAUTION - Risk of Electric Shock - More than one disconnect switch may be required to de-energize the equipment before servicing. • Tighten terminal screws to 13 lbf-in • Supported specified line number for the thread terminal copper wire: 12AWG and14AWG.
