Installation Manual

Smart Wi-Fi Plug Mini Installation

OR scan

QR code

1 Download TP-Link Kasa from the App Store or

Google Play.

2 Connect your mobile device to a 2.4GHz Wi-Fi

network.

3 Launch Kasa and follow the in-app instructions

to connect the Smart Plug Mini to your network.

Note: The Smart Plug Mini only supports 2.4GHz networks.

Note: The U.S. plug version is used throughout the Kasa app.

Support

If you encounter any issues during installation or

configuration, please visit www.tp-link.com/support for

web support and troubleshooting information.

7106506712 REV 2.0.0

Sketch 9:41 AM 100%

DONE

Great!

Your Smart Plug Mini is all set up.

It is now saved in your Device List.

Sketch 9:41 AM 100%

Power up your Smart Plug Mini

Plug in your Smart Plug Mini. If you

don’t see the LED light, press the

power button once.

Quick Start Guide

HS105

Add Device

Sketch 9:41 AM 100%

Smart Plug

Smart Plug Mini

Smart Bulb

Smart Switch

PAGE 1
Quick Start Guide HS105 Smart Wi-Fi Plug Mini Installation 1 Download TP-Link Kasa from the App Store or Google Play. OR scan QR code 2 Connect your mobile device to a 2.4GHz Wi-Fi network. Note: The Smart Plug Mini only supports 2.4GHz networks. 3 Launch Kasa and follow the in-app instructions to connect the Smart Plug Mini to your network. Sketch 9:41 AM 100% Add Device Sketch 9:41 AM 100% Plug in your Smart Plug Mini. If you don’t see the LED light, press the power button once.
PAGE 2
Smart Wi-Fi Plug Mini Press to turn the socket ON or OFF. Press and hold for 5 seconds or until the LED flashes amber and blue alternately to initiate the app onboarding process (SoftAP). Press and hold for 10 seconds or until the LED flashes amber rapidly to factory reset the Smart Plug Mini. LED Flashing amber and blue: App onboarding process (SoftAP) initiated. Coffee Maker: 800 W Flashing blue rapidly: Connecting to the Desk Lamp: 235.2 W network. LCD: 270 W Solid blue: Connected to the network.