Instruction Manual

Explanation of the symbols on the product label
Note: The product label can be found at the bottom of the product and its I.T.E. power supply.
Symbol Explanation
Class II equipment
AC voltage
Indoor use only.
Polarity of output terminals
Energy efficiency marking (Level VI)
RECYCLING
This product bears the selective sorting symbol for Waste electrical and
electronic equipment (WEEE). This means that this product must be handled
pursuant to European directive 2012/19/EU in order to be recycled or
dismantled to minimize its impact on the environment.
User has the choice to give his product to a competent recycling organization
or to the retailer when he buys a new electrical or electronic equipment.
Mounting Requirements
For safety, we recommend you to use the original screws in the package when mounting. The
following are alternatives to mount the device on the wall:
• (For EAP115-Wall / EAP230-Wall) Use a 86 mm/standard EU wall junction box and 2 screws
which comply with ANSI B1.1 4# or 6# standard and are longer than 15 mm.
• (For EAP225-Wall / EAP235-Wall) Use a 86 mm/standard EU/standrad US wall junction box
and 2–4 screws which comply with ANSI B1.1 4#, 6# or 8# standard and are longer than 8.5
mm.