User's Guide
Table Of Contents
- About this User Guide
- 1 Quick Start
- 2 Configure the Network
- 3 Monitor the Network
- 4 Manage the EAP
- 5 Configure the System
- 6 Application Example
- Appendix: Omada App
59
View Client Information
There are two types of clients: users and portal authenticated guests. Users are the clients
that connect to the SSID with portal authentication disabled. Guests are the clients that
connect to the SSID with portal authentication enabled.
Click the
to select the client types to view the information of the EAP. The
following figure posted in the introduction takes user as an example.
The following client information is displayed:
Hostname Displays the hostname of the user.
IP Address Displays the IP address of the user.
MAC Address Displays the MAC address of the user.
Band Displays the frequency band the user is working on.
SSID Displays the SSID the user is connecting to.
Active Time Displays how long the user has been connected to the SSID.
Up (Byte) Displays the user’s total uploaded traffic to the EAP since the last
connection.
Down (Byte) Displays the user’s total downloaded traffic from the EAP since the last
connection.
RSSI (dBm) Displays the RSSI(Received Signal Strength Indication) of the user.
Rate (Mbps) Displays the wireless transmission rate of the user.