User's Guide

22
2.1.2 Configure Wireless Advanced Settings
Proper wireless parameters can improve the performance of your wireless network.
This section introduces how to configure the advanced wireless parameters of the EAP,
including
Radio Setting , Load Balance , Airtime Fairness and More Settings .
Radio Setting
Radio settings directly control the behavior of the radio in the EAP and its interaction with
the physical medium; that is, how and what type of signal the EAP emits.
Select the frequency band (2.4GHz/5GHz) and configure the following parameters.
Wireless Mode Select the IEEE 802.11 mode the radio uses.
When the frequency of 2.4GHz is selected, 802.11b/g/n mixed, 802.11b/g
mixed, and 802.11n only modes are available:
802.11b/g/n mixed: All of 802.11b, 802.11g, and 802.11n clients operating
in the 2.4GHz frequency can connect to the EAP. We recommend you
select the 802.11b/g/n mixed mode.
802.11b/g mixed: Both 802.11b and 802.11g clients can connect to the
EAP.
802.11n only: Only 802.11n clients can connect to the EAP.
When the frequency of 5GHz is selected, 802.11 a/n/ac mixed, 802.11n/ac
mixed and 802.11 ac only are available:
802.11a/n/ac mixed: All of 802.11a, 802.11n clients and 802.11ac clients
operating in the 5GHz frequency can connect to the EAP.
802.11n/ac mixed: Both 802.11n clients and 802.11ac clients operating in
the 5GHz frequency can connect to the EAP.
802.11ac only: Only 802.11ac clients can connect to the EAP.