User Guide

EAP Controller User Guide Chapter 1 System Setup

Step 3: Set an SSID name (wireless network name) and password. The EAP Controller will simultaneously

create two wireless networks, a 2.4GHz one and a 5GHz one both encrypted in the WPA2-PSK

mode. Click Next.

Step 4: Configure an admin name and password for login to the EAP Controller. Specify an email address

to receive the notification emails and reset your password if necessary. Click Next to continue.

NOTE:

 Please remember well your password. After logging into the Controller, please set Mail Server on

the Controller Settings page so that you can reset the password if necessary.

 The configured admin name and password will respectively serve as the username and password of

the adopted EAP devices for the first time. You can change the username and password of each EAP

device on the Device Account page.