User Guide

EAP Controller User Guide Chapter 6 Application Example

Website: www.supermarketa.com,

IP of External Radius Server: 192.168.1.103, port: 1812,

External Web Portal URL: www.supermarketa.net,

IP/subnet mask of External Web Server: 175.20.20.115/32, port: 80.

The network administrator can perform the following steps to set the Portal authentication for the EAP

network.

Step 1: Sign in to the EAP Controller management interface and go to Wireless Settings > Basic Wireless

Setting.

Step 2: Select the SSID you want to enable the portal authentication and click . Then the following

window will pop up. Check the Portal Enable box.

Step 3: Go to Wireless Control > Portal.

There are three authentication types available.

 Select No Authentication in Authentication Type. Users can access the network without the

username and password on the web portal page.