User Guide

EAP Controller User Guide Chapter 5 AP Details

Select the Channel used by the EAP device to improve wireless performance. The range of available

channels is determined by the radio mode and the country setting. If you select Auto for the channel

setting, the EAP device scans available channels and selects a channel where the least amount of traffic

is detected.

Enter the Tx Power (transmit power) value. The maximum transmit power may vary among different

countries and regions.

5.4.4 Load Balance

By restricting the maximum number of clients accessing the EAPs, Load Balance helps to achieve rational

use of network resources.

Select the frequency band (2.4GHz/5GHz) and enable the Load Balance function. If this function is

enabled, you can specify the maximum number of connected clients. While more clients want to connect,

the EAP will begin to check those with lower signals and disconnect them.

5.4.5 SSID Override

Click SSID Override, select the frequency band and the table will display the previous network name.