User Guide

EAP Controller User Guide Chapter 4 Global Setting
39
4.3.3 LED
The LED page allows you to turn on/off the LED lights of EAPs.
4.3.4 Backup&Restore
You can save the current configuration of the EAPs as a backup file and if necessary, restore the
configuration using the backup file. It is recommended to back up the settings before you upgrade the
device.
NOTE:
The format of the restore file is “.cfg”.
4.3.5 Batch Upgrade
On the Batch Upgrade page, you can upgrade the EAP devices in batches according to their model.
Select the EAP model and display the EAP amount. Click Browse to locate and choose the upgrade file in
your PC. Then click Upgrade to finish the batch upgrading.