User Guide

EAP Controller User Guide Chapter 4 Global Setting

 Period Time: Specify a period time to regularly send the system log mail. For example, 5 indicates

that the mail will be sent once every five hours.

Enable Server

System logs can also be sent to a server. You can enable the system log server and enter its IP address and

port.

Enable NVRAM

NVRAM (Non-volatile Random Access Memory) is a RAM that can still save data even if a device powers

off. The Nvram feature can help reserve the system logs when an EAP device powers off. By default, it is

disabled.

4.3.2 Device Account

You can change the EAP devices’ username and password to protect them from being illegally adopted.

After the EAP devices are adopted at the first time, their username and password will change into the

username/password (current username/password) of the admin account created at Quick Setup. You can

directly specify a new username and password for them. If these EAPs have already been adopted, the

Controller will push configuration of the new specified username and password to each EAP device.