User Guide

EAP Controller User Guide Chapter 4 Global Setting
37
4.3 System
4.3.1 Log Setting
You can choose the way to receive system logs on Log Setting page. These parameters can be configured:
Auto Mail Feature, Enable Server and Enable Nvram.
Auto Mail Feature
If Auto Mail Feature is enabled, system logs will be sent to a specified mailbox. After checking the Auto
Mail Feature box, the following screen will appear.
Enter the sender’s mail address, the receipt’s address and the IP address of the SMTP server.
You can check the Enable Authentication box to enable mail server authentication. Enter the sender’s
mail account name and password.
System logs can be sent at specific time or time interval. Select Time Mode:
 Fixation Time: Specify a fixed time to send the system log mails. You can respectively select the hour
number and the minute number.