User Guide

EAP Controller User Guide Chapter 4 Global Setting

Step 2: Specify the policy name. And set either Source IP Range with the subnet/mask of the clients or

Source MAC. Then set the Destination IP Range with the destination IP address and subnet mask

for free authentication policy. Assign the service port as the Destination Port. Check the Status

box to enable the policy.

NOTE:

When External Radius Server is configured and External Web Portal is selected, please set the IP address

and subnet mask of your external web portal server as the Destination IP Range. Otherwise, clients cannot

access it before authenticated

Step 3: Click Apply and the policy is successfully added as the following screen.

4.2.3 MAC Filter

MAC filter can be used to allow or exclude the listed clients to authenticate with the access point. Thereby

it can effectively control client’s access to the wireless network.

Add MAC Filter Group

Step 1: Click and specify a name for the group.