User Guide
Table Of Contents
- About this User Guide
- Overview
- 1 Operation Modes
- 2 Quick Start
- 3 Monitor the Network
- 3.1 View the Device Information
- 3.2 View the Wireless Settings
- 3.3 View Wireless Signal Quality
- 3.4 View Radio Status
- 3.5 View the LAN Settings
- 3.6 View the WAN Settings
- 3.7 Monitor Throughput
- 3.8 Monitor Stations
- 3.9 Monitor Interfaces
- 3.10 Monitor ARP Table
- 3.11 Monitor Routes
- 3.12 Monitor DHCP Clients
- 3.13 Monitor Dynamic WAN
- 4 Configure the Network
- 5 Configure the Wireless Parameters
- 6 Manage the Device
- 7 Configure the System
- 8 Use the System Tools
73
IPv6 Enable or disable the IPv6 function. If the IPv6 function is enabled, the
device will obtain a LAN IPv6 address. Select a method for the device to
obtain the LAN IPv6 address according to the information provided by
your ISP.
•• Static
Select static and enter the LAN IPv6 address and IPv6 netmask.
•• SLAAC
Select SLAAC and the device will obtain the LAN IPv6 address
automatically.
•• DHCPv6
Select DHCPv6 and the device will obtain the LAN IPv6 address
automatically.
2.•Click
Apply
, then click
Save
.