User manual

Time: Specify the device’s time. Select the number from the drop-down

list in time format HH/MM/SS.

NTP Server I/NTP

Server II:

Please input the primary NTP sever address and an alternative NTP

server address.

Configuration Management

In this section, you can backup, restore, reset or reboot your CAP.

Figure 6-6 Configuration Management

Backup: Click Backup to save a copy of your current settings. Please save

your copy in a secure file location. It is recommended to back up the

settings before you change the configurations and upgrade the

firmware.

Restore: Click Browse to locate and select the backup file, then click Upload

to import the file to recover the configurations.

Factory Restore: Click Reset to restore your device to its factory default settings.

Reboot: Click Reboot to reboot your device. Do NOT power off your device

while it is rebooting.

Firmware Upgrade

Please log in http://www.tp-link.com/ to download the latest system file. Click Browse to

locate and select the firmware file. Click Upload to upload the file to upgrade.

Figure 6-7 Firmware Upgrade