User manual

Figure 6-4 System Log
Check Log: Click Open to check the system log.
Download Log: Click Download to download the system log.
Send To Server/
Server Address:
Check the box to enable the function. If you want to check the system
log in a specified host, please install a system log server and enter the
server IP in this field. Click OK, then the AP will send the system log to
the specified IP address.
Time Setting
System time represents the device system’s notion of the passing of time. System time
is the standard time for Scheduler and other time-based functions. You can manually set
the system time, configure the system to acquire its time settings from a preconfigured
NTP server.
Figure 6-5 Time Settings
Time zone: Select your local time zone from the drop-down list.
Date: Set the current date, in format YYYY/
MM/DD. For example, for
November 25, 2014, enter 2014/11/25 in the field.
25