User manual

Figure 4-6 AP List
After selecting the desired root AP, the WDS settings page will be shown as below. If the
root AP is encrypted, you should enter the PSK password manually. Click OK to finish the
settings.
Figure 4-7 WDS Settings
Manually
You should manually enter the parameters of the root AP. Click OK to finish the settings.
WDS: Check the box to enable WDS feature.
SSID: The SSID of the AP your device is going to connect to as a client.
BSSID: The BSSID of the AP your device is going to connect to as a client.
Security Mode:
This option should be chosen according to the AP's security
configuration. It is recommended that the security type is the same as
your AP's security type.
15