User Guide Outdoor Security Wi-Fi Camera Tapo C310 ©2021 TP-Link 1910013063 REV2.0.
Contents About This Guide············································································ 1 Introduction······················································································· 2 Appearance······················································································· 3 Set Up Your Camera······································································ 5 Set Up Using Amazon Frustration-Free Setup··············· 7 Install a microSD Card································
About This Guide This guide provides a brief introduction to the Outdoor Security Wi-Fi Camera and the Tapo app, as well as regulatory information. Please note that features available in Tapo may vary by model and software version. Tapo availability may also vary by region. All images, steps, and descriptions in this guide are only examples and may not reflect your actual Tapo Camera experience.
Introduction Tapo C310 is a full-featured weatherproof security camera that you can access from anywhere. Receive instant notifications and check feeds when the motion is detected. Moreover, the automatic siren system will trigger light and sound to frighten away unwanted visitors after the camera detects motion. Day or night, rain or shine, the Tapo camera protects what you love most. • 3MP High Definition – Delivers high resolution video helping you never miss a detail.
Appearance Front Panel Bottom Panel MIC microSD Card Slot Insert a microSD card for local recording RESET Hold for 5 seconds to factory reset the camera Speaker IR LED System LED DC Power Connector Used to connect to a 9V/0.
System LED Description Solid red Blinking red and green Starting up Ready for setup Blinking red slowly Connecting to Wi-Fi Solid amber Connected to Wi-Fi Solid orange Connected to TP-Link Cloud server Blinking red quickly Camera resetting Blinking green quickly Camera updating 4
Set Up Your Camera Follow the steps below to get started with your new camera, or you can follow the setup video at https://www.tp-link.com/support/setup-video/. Step 1. Download Tapo App Get the Tapo app from the Apple App Store or Google Play, or by scanning the QR code below. Step 2. Log In Open the app, and log in with your TP-Link ID. If you don't have an account, create one first. Step 3. Add Your Camera Tap the model.
Step 4. Configure Camera Follow app instructions to set up your camera via wired or wireless connection (for setup only), and add it to your home network. After setup, you can use your camera via wired connection or wirelessly.
Set Up Using Amazon Frustration-Free Setup What is Amazon Frustration-Free Setup? Amazon Frustration-Free Setup can help connect and set up Tapo smart devices in fewer steps, without having to remember and re-enter your Wi-Fi password on each device. To use this feature, confirm the following: ● The new Tapo device supports Amazon FFS. ● You have an Amazon FFS enabled Alexa device or router. ● You have saved your Wi-Fi information to Amazon by using Alexa echo.
How to use Amazon Frustration-Free Setup with Tapo devices 1. Open the Amazon Alexa app. Then tap More and select Skills & Games. 2. Enter Tapo in the search bar and choose Tapo.
3. Tap the ENABLE TO USE button. 4. Log in with your TP-Link ID that has bound to your Tapo device, and tap Authorize. After authorized successfully, the message Tapo has been successfully linked will come up.
5. Plug in your Tapo device and the setup will complete automatically in two minutes. For setting up more Tapo devices, just plug in and enjoy! Done! If this device displays on the Home page in the Tapo app, it indicates this device has been successfully associated with your Amazon account and joined your Wi-Fi network automatically. If this device does not display on the Home page in the Tapo app, try setting it up manually.
Install a microSD Card Follow the steps below to install the microSD card for local recording, or follow the installation video at https://www.tp-link.com/support/setup-video/. You can go to Camera Settings > microSD Card in the Tapo app to check the card status or format your card. 1. Loosen the screws on the back panel and remove the cover. 2. Identify the direction of the microSD card and carefully insert the card into the slot. Push in the card until you hear a clicking sound.
Mount Your Camera When you finish adding your camera in the Tapo app, you can place your camera on a flat surface, or mount it on a wall or ceiling with the provided mounting template and screws. Follow the steps below to mount your new camera, or follow the setup video at https://www.tp-link.com/support/setup-video/. Step 1. Drill Holes Stick the mounting template to the desired mounting place. Drill 3 screw holes according to the template. Step 2.
Install Waterproof Items When the camera is installed outdoors, please install waterproof items to waterproof your camera. Make sure each part is securely attached and the water-proofing rings are flush to keep out water. Follow the steps below to install waterproof items, or follow the installation video at https://www.tp-link.com/support/setup-video/. Install Waterproof Cable Attachments Install the waterproof cable attachments for the network interface when the camera is installed outdoors.
Main Camera Controls After you successfully set up the camera, you will see your camera listed on the home page. You can view and manage your camera from anywhere at any time with the Tapo app. Home Page This page lists all your cameras you've added and you can view them directly and manage them easily. Tap the camera or go to Camera Preview > Manage to enter the Live View page.
Camera Settings On Live View page, tap to enter the Camera Settings page. You can change the settings of your camera to meet various needs, such as change your camera name, customize detection settings and recording schedules, turn on or off notifications, set activity zones, etc. Me On this page, you can edit your account, quickly check the memorable moments you saved, or find the FAQs of using smart camera and basic info related to the Tapo app.
Camera Detection & Alerts Receive notifications and check feeds when the camera detects a motion, or when someone crosses a boundary, enters an area you've set, or obstructs the camera. Insert a microSD card to record the clips when activity detected. Otherwise, you can only receive the notifications. Note: Initialize the SD card on the Tapo app before using it. Step 1: Turn On Detection Go to Camera Settings page and tap Detection & Alerts to turn on the detection and customize its alert settings.
Line-Crossing Detection Add one or more lines that should not be crossed, then if the set line is crossed, the camera will send you notifications or even sound an alarm. You can also set the crossing direction and detection schedule. It is ideal for fence detection, property monitoring, and parking areas. Area Intrusion Detection Add one or more activity zones, then when the camera detects someone enters the set zones, the camera will send you notifications or even sound an alarm.
Camera Tampering Detection When the camera view is blocked, it will send you notifications or even sound an alarm. You can adjust the detection sensitivity. Increased sensitivity results in more recordings and notifications. Step 2: Turn On Activity Notifications Turn on Activity Notifications to get instant alerts when your camera detects activities. You can customize the time when the camera sends you notifications.
Step 3: Customize Alarm Settings Customize Camera Alarm settings to trigger a light/sound alarm to frighten away unwanted visitors when your camera detects activities. You can also set the Alarm Schedule as needed. Step 4: Set Recording Schedule After editing the detection settings for the camera, you can set the Recording Schedule for Detection Recording.
Step 5: Check Recordings On the Live View page, tap to find all recordings. Tap the colored sections or the video clips below to check the activity detected. Note: The microSD card is needed for recordings. Initialize the SD card on the app before using it.
24-hour Recordings The microSD card is needed for 24-hour recording and it’s suggested to initialize the SD card on the app before using it. 1. On the Live View page, tap to enter the Camera Settings page. 2. Toggle on to enable the microSD Recording function and set the Recording Schedule for Continuous Recording (24-hour Recording) as needed.
3. On the Live View page, tap to find all recordings. Tap the colored sections or the video clips below to check the activity detected. Note: The microSD card is needed for recordings. Initialize the SD card on the app before using it. 3.
Privacy Mode On the Live View page, tap to enable the Privacy Mode. When enabled, streaming and recording functions will be temporarily disabled to protect your privacy. You can tap Disable Privacy Mode to exit Privacy Mode and the camera will be back to work.
How to Reset Your Camera Follow the steps below to reset your camera via the Reset button, or follow the installation video at https://www.tp-link.com/support/setup-video/. You can also go to Camera Settings in the Tapo app and tap Remove Device at the bottom to factory reset your camera. 1. Loosen the screws on the back panel and remove the cover. 2. Press and hold the Reset button for at least 5 seconds until the LED blinks red.
Authentication FCC compliance information statement Product Name: Outdoor Security Wi-Fi Camera Model Number: Tapo C310 Component Name Model AC ADAPTER T090060-2B1 Responsible Party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6804 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY (the maximum transmitted power) 2412MHz—2472MHz (20dBm) EU Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
Canadian Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licenceexempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
低功率射頻器材須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 安全諮詢及注意事項 • 請使用原裝電源供應器或只能按照本產品注明的電源類型使用本產品。 • 清潔本產品之前請先拔掉電源線。請勿使用液體、噴霧清潔劑或濕布進行清潔。 • 注意防潮，請勿將水或其他液體潑灑到本產品上。 • 插槽與開口供通風使用，以確保本產品的操作可靠並防止過熱，請勿堵塞或覆蓋開口。 • 請勿將本產品置放於靠近熱源的地方。除非有正常的通風，否則不可放在密閉位置中。 • 請不要私自打開機殼，不要嘗試自行維修本產品，請由授權的專業人士進行此項工作。 限用物質含有情況標示聲明書 設備名稱：Outdoor Security Wi-Fi Camera 型號（型式）：Tapo C310 Equipment name 單元 Unit PCB 外殼 電源供應器 其他及其 配件 鉛 Type designation (Type) 限用物質及其化學符號 汞 鎘 Restricted substances and its chemical symbols 六價鉻 多溴聯苯 多溴二苯醚 Lead Mercur
備考 1.〝超出 0.1 wt %〞及〝超出 0.01 wt %〞係指限用物質之百分比含量超出百分比含量基準值 Note 1：“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. 備考 2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。 Note 2：“○” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. 備考 3.
Storage Temperature: -40ºC~70ºC (-40°F ~ 158°F ) Please read and follow the above safety information when operating the device. We cannot guarantee that no accidents or damage will occur due to improper use of the device. Please use this product with care and operate at your own risk. Explanation of the symbols on the product label Symbol DC voltage Explanation Indoor use only RECYCLING This product bears the selective sorting symbol for Waste electrical and electronic equipment (WEEE).
