User's Guide

92
Chapter 14
Manage the Router
• Forbid all devices to manage the router remotely:
Select
Disable Remote Management and click Save.
• Allow all devices to manage the router remotely:
1. Select
Enable Remote Management.
2. Use the default value
HTTPS Port: 443 and HTTP Port: 80 or enter values between
1024 and 65535.
3. Select
All Devices in Remote Managers.
4. Click
Save.
• Allow Specified device to manage the router remotely:
1. Select
Enable Remote Management.
2. Use the default value
HTTPS Port: 443 and HTTP Port: 80 or enter values between
1024 and 65535.
3. Select
Specified Devices in Remote Managers.
4. Enter IP address of the device in
Only this IP address.
5. Click
Save.
Devices on the internet can log in to
https://Router’s WAN IP address: HTTPS port
number
(such as http://113.116.60.229:1024) or http://Router’s WAN IP address: HTTP
port number
to manage the router.
Tips:
• You can find the WAN IP address of the router on
Basic > Network Maps > Internet.
• The router’s WAN IP is usually a dynamic IP. Please refer to
Set Up a Dynamic DNS Service Account if you want to log
in to the router through a domain name.
14. 11. System Log
When the router does not work normally, you can save the system log and send it to the
technical support for troubleshooting.