User's Guide

Chapter 13

Customize Your Network Settings

13. 7. 2. Method 2: Use the WPS Button on the Web Management Page

Use this method if your client device has a WPS button.

1. Visit

http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for

the router.

2. Go to

Advanced > Wireless > WPS.

3. Click Start WPS.

4. Press the WPS button of the client device directly.

5. The WPS LED of the router flashes for about 2 minutes during the WPS process.

6. When the WPS LED is on, the client device has successfully connected to the router.

13. 7. 3. Method 3: Enter the Router’s PIN on Your Client Device

Use this method if your client device asks for the router’s PIN.

1. Visit

http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for

the router.

2. Go to

Advanced > Wireless > WPS. Click Method Two--PIN.

3. Take a note of the router’s PIN. You can also click Generate to get a new PIN.

4. On the client device, enter the router’s PIN. (The default PIN is also printed on the

label of the router.)

5. The WPS LED flashes for about two minutes during the WPS process.

6. When the WPS LED is on, the client device has successfully connected to the router.

Note: