User Guide Home Security Wi-Fi Camera Tapo C110 © 2021 TP-Link 1910012986 REV1.0.
Contents About This Guide······················································································· 1 Introduction·································································································· 2 Appearance·································································································· 3 Set Up Your Camera················································································· 4 Setup using Amazon Frustration-Free Setup····························
About This Guide This guide provides a brief introduction to the Home Security Wi-Fi Camera and the Tapo app, as well as regulatory information. Please note that features available of the Tapo smart camera may vary by model and software version. The availability may also vary by region or ISP. All images, steps, and descriptions in this guide are only examples and may not reflect your actual experience.
Introduction When you are away home, there are always something you care about. This is where the smart camera functions. No matter your child is climbing the kitchen cabinet, or the pet is stealing snacks, Tapo C110 helps you stay with them anytime, anywhere. • 3MP High-Definition – Provide greater sharpness and clarity. • Night Vision – Even at night, the camera can provide a visual distance of up to 30 ft. • Live View – Always stay with what matters most to you anytime, anywhere.
Appearance The Home Security Wi-Fi Camera has a system LED that changes color according to its status, an alert light, lens, microphone, DC power port, RESET button, and a microSD card slot. Refer below for details. Lens Microphone Built-in internal microphone. Note: Do NOT insert objects into the hole. Alert Light Blinks to alert you when the activity detected. DC Power Port Connect the power cord provided.
Set Up Your Camera Follow the steps below to get started with your new camera. Step 1. Download App Get the Tapo app from the Apple App Store or Google Play, or by scanning the QR code below. Step 2. Log In Open the app, and log in with your TP-Link ID. If you don't have an account, create one first. Step 3. Add Your Camera Tap the model.
Step 4. Configure Camera Follow app instructions to configure your camera and add it to your home network. Step 5. Place Camera Place your camera on a flat surface, or install it on a wall or ceiling with the provided mounting screws. 1. Mark Position Place the mounting template where you want the camera. For wall mounting, drill two holes through two circles. 2. Mount Base Affix two mounting screws with the help of mounting template.
Setup using Amazon Frustration-Free Setup What is Amazon Frustration-Free Setup? Amazon Frustration-Free Setup can help connect and set up Tapo smart devices in fewer steps, without having to remember and re-enter your Wi-Fi password on each device. To use this feature, confirm the following: ● The new Tapo device supports Amazon FFS. ● You have an Amazon FFS enabled Alexa device or router. ● You have saved your Wi-Fi information to Amazon by using Alexa echo.
How to use Amazon Frustration-Free Setup with Tapo devices 1. Open the Amazon Alexa app. Then tap on the hamburger icon in the upper left corner and select Skills & Games. 2. Enter Tapo in the search bar and choose Tapo.
3. Tap the ENABLE button. 4. Log in with your TP-Link ID that has bound to your Tapo device, and tap Authorize. After authorized successfully, the message Tapo has been successfully linked will come up.
5. Plug in your Tapo device and the setup will complete automatically in two minutes. For setting up more Tapo devices, just plug in and enjoy! Done! If this device displays on the Home page in the Tapo app, it indicates this device has been successfully associated with your Amazon account and joined your Wi-Fi network automatically. If this device does not display on the Home page in the Tapo app, try setting it up manually.
Main Camera Controls After you successfully set up the camera, you will see your camera listed on the home page. You can view and manage your camera from anywhere at any time with the Tapo app. Home Page This page lists all your cameras you've added and you can view them directly and manage them easily. Tap the camera or go to Camera Preview > Manage to enter the Live View page.
Camera Settings On Live View page, tap to enter the Camera Settings page. You can change the settings of your camera to meet various needs, such as change your camera name, customize detection settings and recording schedules, turn on or off notifications, set activity zones, etc. Me On this page, you can edit your account, quickly check the memorable moments you saved, or find the FAQs of using smart camera and basic info related to the Tapo app.
Motion Detection With motion detection, the Tapo app alerts you of activity that matters and sends notifications straight to you when motion detected. Insert a microSD card to record the clips when motion detected. Otherwise, you can only receive the notifications. Note: Initialize the SD card on the app before using it. 1. Go to Camera Settings page and tap Detection & Alerts to customize its current detection settings. 2. On the Detection & Alerts page, enable the Motion Detection function.
3. Customize Camera Alarm settings. Choose Alarm Type (Sound/Light) and Alarm Sound (Siren/Tone), and set Alarm Schedule as needed. 4. Customize Activity Zones and the camera will only detect motion in custom zones. Entire view is covered by default.
5. Adjust Motion Sensitivity (Low/Normal/High) as needed. Increased sensitivity results in more recordings and notifications. 6. After editing the detection settings for the camera, you can set the Recording Schedule for the motion detection.
7. On the Live View page, tap to find all recordings. The orange sections are recordings for motion detection. Note: The microSD card is needed for recordings. Initialize the SD card on the app before using it.
24-hour Recordings The microSD card is needed for 24-hour recording and it’s suggested to initialize the SD card on the app before using it. 1. On the Live View page, tap to enter the Camera Settings page. 2. Toggle on to enable the microSD Recording function and set the Recording Schedule for Continuous Recording (24-hour Recording) as needed.
3. On the Live View page, tap to find all recordings. The blue sections mean continuous recording. Note: The microSD card is needed for recordings. Initialize the SD card on the app before using it.
Privacy Mode On the Live View page, tap your privacy. to enable the Privacy Mode.
Authentication FCC Compliance Information Statement Product Name: Home Security Wi-Fi Camera Model Number: Tapo C110 Component Name I.T.E POWER SUPPLY Component Model T090060-2B1 Product FCC ID 2AXJ4C110 Responsible party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.
• Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
FCC Compliance Information Statement Product Name: I.T.E POWER SUPPLY Model Number: T090060-2B1 Responsible party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. We, TP-Link USA Corporation, has determined that the equipment shown as above has been shown to comply with the applicable technical standards, FCC part 15. There is no unauthorized change is made in the equipment and the equipment is properly maintained and operated.
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY (the maximum transmitted power) 2412MHz—2472MHz (20dBm) EU Declaration of Conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : 1. l’appareil ne doit pas produire de brouillage; 2.
• 請不要私自拆開機殼或自行維修，如產品有故障請與原廠或代理商聯繫。 限用物質含有情況標示聲明書 設備名稱：Home Security Wi-Fi Camera Equipment name 單元 Unit PCB 外殼 電源供應器 其他及其 配件 鉛 汞 鎘 型號（型式）：Tapo C110 Type designation (Type) 限用物質及其化學符號 Restricted substances and its chemical symbols 六價鉻 多溴聯苯 多溴二苯醚 Lead Mercury Cadmium Hexavalent chromium Polybrominated biphenyls Polybrominated diphenyl ethers − ○ ○ ○ ○ ○ (Pb) ○ ○ − (Hg) ○ ○ ○ (Cd) ○ ○ ○ (Cr+6) ○ ○ ○ (PBB) ○ ○ ○ 備考 1.〝超出 0.1 wt %〞及〝超出 0.
Safety Information • Keep the device away from water, fire, humidity or hot environments. If you need service, please contact us. • Do not attempt to disassemble, repair, or modify the device. • Do not use damaged charger or USB cable to charge the device. • Do not use any other chargers than those recommended • Do not use the device where wireless devices are not allowed. • Adapter shall be installed near the equipment and shall be easily accessible.
