Chapter 14 • Allow all LAN connected devices to manage the router: • Allow specific devices to manage the router: Manage the Router Select All Devices for Local Managers. 1. Select All Devices for Local Managers and click SAVE. 2. Click Add Device.
Chapter 14 Manage the Router 3. Click VIEW CONNECTED DEVICES and select the device to manage the router from the Connected Devices list, or enter the MAC address of the device manually. 4. Specify a Description for this entry. 5. Click SAVE. 14. 6. Remote Management This feature allows you to control remote devices’ authority to manage the router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2.
Chapter 14 Manage the Router 4. Click SAVE. Devices on the internet can log in to http://Router’s WAN IP address:port number (such as http://113.116.60.229:1024) to manage the router. • • • Tips: You can find the WAN IP address of the router on Network Map > Internet. The router’s WAN IP is usually a dynamic IP. Please refer to Set Up a Dynamic DNS Service Account if you want to log in to the router through a domain name. Allow a specific device to manage the router remotely: 1.
Chapter 14 Manage the Router 1. Visit http://tplinkwifi.net, and log in your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > System Log. 3. Choose the type and level of the system logs as needed. 4. In the Save Log section, click SAVE TO LOCAL to save the system logs to a local disk.
Chapter 14 Manage the Router 1 ) Email From: Enter the email address used for sending the system log. 2 ) Select Require Password. Tips: Generally, Require Password should be selected if the login of the mailbox requires username and password. 3 ) Username: Enter the email address used for sending the system log. 4 ) Email Password: Enter the password to login the sender’s email address. 5 ) SMTP Server: Enter the SMTP server address. Tips: SMTP server is available for users in most webmail systems.
Chapter 14 Manage the Router 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > Diagnostics. 3. Enter the information: 1 ) Choose Ping or Traceroute as the diagnostic tool to test the connectivity; • • Ping is used to test the connectivity between the router and the tested host, and measure the round-trip time.
Chapter 14 Manage the Router The figure below indicates the proper connection between the router and the Yahoo server (www.Yahoo.com) tested through Traceroute. 14. 9. Set Up System Time System time is the time displayed while the router is running. The system time you configure here will be used for other time-based functions like Parental Controls. You can choose the way to obtain the system time as needed. 1. Visit http://tplinkwifi.
Chapter 14 Manage the Router 5. (Optional) In the NTP Server II field, enter the IP address or domain name of the second NTP Server. 6. Click SAVE. • To get time from your computer: 1. In the Set Time field, select Get from Managing Device. 2. The time of your computer will then be displayed and click SAVE. • To manually set the date and time: 1. In the Set Time field, select Manually. 2. Set the current Date (In MM/DD/YYYY format). 3. Set the current Time (In HH/MM/SS format). 4. Click SAVE.
Chapter 14 Manage the Router 2. Select the correct Start date and time when daylight saving time starts at your local time zone. 3. Select the correct End date and time when daylight saving time ends at your local time zone. 4. Click SAVE. 14. 10. Set the Router to Reboot Regularly The Scheduled Reboot feature cleans the cache to enhance the running performance of the router. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2.
Chapter 14 Manage the Router 14. 11. Control the LED The LED of the router indicates its activities and status. You can enable the Night Mode feature to specify a time period during which the LED is off. 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go to Advanced > System > LED Control. 3. Enable Night Mode. 4. Specify the LED off time, and the LED will be off during this period every day. 5. Click SAVE.
FAQ Q1. What should I do if I forget my wireless password? The default wireless password is printed on the label of the router. If the password has been altered: 1. Connect your computer to the router using an Ethernet cable. 2. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 3. Go to Wireless to retrieve or reset your wireless password. Q2.
4 ) Click LAN settings and deselect the following three options and click OK. 5 ) Go to Advanced > Restore advanced settings, click OK to save the settings.
• Use another web browser or computer to log in again. • Reset the router to factory default settings and try again. If login still fails, please contact the technical support. Note: You’ll need to reconfigure the router to surf the internet once the router is reset. Q4. What should I do if I can’t access the internet even though the configuration is finished? 1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2.
• Restart the modem and the router. 1 ) Power off your modem and router, and leave them off for 1 minute. 2 ) Power on your modem first, and wait about 2 minutes until it gets a solid cable or Internet light. 3 ) Power on the router. 4 ) Wait another 1 or 2 minutes and check the internet access. • Reset the router to factory default settings and reconfigure the router. • Upgrade the firmware of the router.
1 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2 ) Go to Internet or Advanced > Network > Internet and focus on the MAC Clone section. 3 ) Choose an option as needed (enter the MAC address if Use Custom MAC Address is selected), and click SAVE.
1 ) Power off your modem and router, and leave them off for 1 minute. 2 ) Power on your modem first, and wait about 2 minutes until it get a solid cable or Internet light. 3 ) Power on the router. 4 ) Wait another 1 or 2 minutes and check the internet access. • Double check the internet connection type. 1 ) Confirm your internet connection type, which can be learned from the ISP. 2 ) Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router.
• Make sure the wireless adapter driver is installed successfully and the wireless adapter is enabled. • On Windows 7 1 ) If you see the message No connections are available, it is usually because the wireless function is disabled or blocked somehow. 2 ) Click Troubleshoot and windows might be able to fix the problem by itself.
If you can find your wireless network but fail to connect, please follow the steps below: • Authenticating problem/password mismatch: 1 ) Sometimes you will be asked to type in a PIN number when you connect to the wireless network for the first time. This PIN number is different from the Wireless Password/Network Security Key, usually you can only find it on the label of your router.
• Windows unable to connect to XXXX / Can not join this network / Taking longer than usual to connect to this network: • • • Check the wireless signal strength of your network. If it is weak (1~3 bars), please move the router closer and try again. Change the wireless Channel of the router to 1, 6 or 11 to reduce interference from other networks. Re-install or update the driver for your wireless adapter of the computer.
FCC compliance information statement Product Name: AX1800 Dual-Band Wi-Fi 6 Router Model Number: Archer AX20/Archer AX1800 Component Name I.T.E. Power Model T120200-2B1 Responsible party: TP-Link USA Corporation Address: 10 Mauchly, Irvine, CA 92618 Website: http://www.tp-link.com/us/ Tel: +1 626 333 0234 Fax: +1 909 527 6803 E-mail: sales.usa@tp-link.com This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter.
• Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2.
CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. OPERATING FREQUENCY(the maximum transmitted power) 2400 MHz -2483.5 MHz (20dBm) 5150 MHz -5250 MHz (23dBm) EU declaration of conformity TP-Link hereby declares that the device is in compliance with the essential requirements and other relevant provisions of directives 2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
Canadian Compliance Statement This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
NCC Notice & BSMI Notice: 注意！ 㚡〷䣣䦞䨡㕌�あ㆟㓓㜡䢆㙆╞Ψヺ䞛�㭺Ψㆤ㞠¢㜋䜤㊚㝉㨶�㎪╕〷㜄㮏䙉㆗䢆 㓓¢㋇〉㆟㓓㊚䙉㆗㩶䣡䝕�㠄㥉㊪㆟㖊£ あ㆟㓓㜡䢆㙆╞�㝉㨶╕〷㨤䥱䛢�⒐㚪㊪ㅢ䢾㈱ホ㠩㤽ξ䞛䛗䥪㩂ㅢ䢾䥪㤑䣮Ψ䧃㑟 ㊬㠤㨶Ψ亨ㅝ㜇㬪䥑ㅢ䢾䣮ヰ〷䝘䦅㝉㨶£ 㙙㝺㈱ホ㠩㤽Ψ㬤㧝䚶㤽㇚㑏ホ䜗ほ㮯䦬�䥑�䚶㠩㤽£ あ㆟㓓㜡䢆㙆╞䦂㛂㝣㈱ホ㠩㤽㊚㆝䦬¢㏕䦊㊪䦮䟽㨶䚶╂䛱㜡㥉䚶䝈䣡䘿�ㅢ䢾£ 䧃┘㔹㨤䥱ㅖ㍐㐺䚟㣙��╳㮯£ ㅹ㪻㧿㬤㤐㥉㠔��〷䧃㨶䉟㇊ほ㝌䚴䛋䚴㣙�£ ⒐㚪䪞䦌㊪㭣��䥲 • 䢯㝉㨶㩶䩂䚶㩽ㆢ䧃㙆㊚�㖊⒒㫮⓺宆㘍㭣㕌〸䚶㩽䟟㥂㝉㨶⓺宆㘍£ • 㭣�ン▩Ψ䢯㢺�㞐㊚㘵㟕㧗䤪䢊䣊〱⓺宆㘍�£ • • • • 㚊䞍⓺宆㘍�㙙䢯㣩⒬ど䚶㩽�£䢯㢺㝉㨶㧗䤪¢䢂䥓㚊䞍䝓㊚䣬╖䞔㥅㚊䞍£ ╿╵䧚䞯㏩ㆢ㠩�㝉㨶Ψ㧮䢻ⓟ⓺宆㘍〸╳㮯㏘㏎亨ン�䜡䣀Ψ䢯㢺ゕ㛤㊚ㅋ䛻 䞯㏩£ 䢯㢺�⓺宆㘍�ヸ䉟㏎㍐䣀㩽〸きヰ£♼ヺ㩂㬎▛〸㠩�Ψㄩ䧿╕㏘ヸ㪠㔴䙅㢍 �㬶£ 䢯╕�㞟㮏〈䞯䝈�Ψ╕�䙱䣷㮏㥅䥂㥒⓺宆㘍Ψ䢯㨻㝢䢸〸䨼䦬�㝎䞔㥅⺗䥲 ㆝㮯£ 㣽㨶㢹�㈔㩂㚎大䙌㝍䣧㕌䣻 設備
Продукт сертифіковано згідно с правилами системи УкрСЕПРО на відповідність вимогам нормативних документів та вимогам, що передбачені чинними законодавчими актами України. Safety Information • Keep the device away from water, fire, humidity or hot environments. • Do not attempt to disassemble, repair, or modify the device. If you need service, please contact us. • Do not use damaged charger or USB cable to charge the device.
