Users Manual Part 3

Chapter 12

Customize Your Network Settings

4. Survey the SSID to be bridged.

• Click SURVEY to scan all available networks and select the network you want

to bridge. The SSID (network name) and MAC Address will be automatically

populated. you can also manually fill in these parameters.

• Manually enter these parameters.

5. Select a Security type and enter the related parameters, which should be the same

as the network to be bridged.

6. Click SAVE .

Note:

• The IP address of the extended router needs to be in the same subnet with the root router.

• You need to enable and configure the WDS Bridging feature for the access point as well.

• WDS and Guest Network cannot be enabled at the same time.

12. 11. Advanced Wireless Settings

Check advanced wireless settings for your device.

1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for

the router.

2. Go to Advanced > Wireless > Additional Settings.

3. Configure advanced wireless settings.