Users Manual Part 3

82
Chapter 12
Customize Your Network Settings
Note:
PIN (Personal Identification Number) is an eight-character identification number preset to each router. WPS supported
devices can connect to your router with the PIN. The default PIN is printed on the label of the router.
12. 9. 3. Push the WPS Button
Click Start WPS on the screen. Within two minutes, press the WPS button on your
device. Success will appear on the above screen and the
LED of the router should
change from pulsing white to solid on, indicating successful WPS connection.
12. 10. Use WDS to Extend Network
WDS (Wireless Distribution System) Bridging feature allows you to bridge a router with
an access point to extend the wireless network coverage. The access point should also
support the WDS Bridging feature.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced > Wireless > WDS.
3. Select Enable WDS Bridging of 2.4GHz WDS, 5GHz-1 WDS or 5GHz-2 WDS.