Users Manual Part 3

110
• Use another web browser or computer to log in again.
• Reset the router to factory default settings and try again. If login still fails, please
contact the technical support.
Note: You’ll need to reconfigure the router to surf the internet once the router is reset.
Q4. What should I do if the router can’t be found via Bluetooth in Tether
(how to reset the router)?
The router’s Bluetooth will be enabled for 30 minutes following a reset to factory
defaults. There are two ways to reset the router:
• With the router powered on, use a pin to press and hold the Reset button on the back
of the router until the LED blinks.
• Log in to the web management page of the router. Go to Advanced > System > Backup
& Restore, and click FACTORY RESTORE. The router will reset and restart automatically.
Q5. What should I do if I cannot access the internet even though the
configuration is finished?
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Network Map or Advanced > Status to check internet status.