Quick Start Guide

ManualsBrandsTp-Link ManualsBridges & RoutersWireless router - DSL modem - 802.11a/b/g/n/ac - desktop

Quick Installation Guide

Wireless MU-MIMO VDSL/ADSL Modem Router

*Images may dier from actual product.

1.Connect the Hardware

Attach the

antennas.

Phone Cable

DSL Splitter

Phone (Optional)

Modem Router

If you don’t need the phone service, just directly connect the modem

router to the phone jack with the provided phone cable, then follow

steps 4 and 5 to complete the hardware connection.

Power Adapter

Enjoy the internet!

3. Follow the step-by-step instructions to set up an internet connection

and register the TP-Link Cloud service.

Note: If the login page does not appear, please refer to FAQ > Q1.

2. Launch a web browser and type in http://tplinkmodem.net or

192.168.1.1. Create a password and get started.

http://tplinkmodem.net

HighMiddleLow

Let’s Get Started

Conrm Password

New Password

Method 1: Via Web Browser

1. Connect your device to the router (wired or wireless)

Ethernet Cable

LAN2LAN1 LAN3 LAN4/WANPower

Phone Jack

Power LAN2LAN1 LAN3 LAN4/WAN

DSL

PHONE

LINE

MODEM

2.Configure the Modem Router

Enjoy the internet!

Push in the Power button

on the side panel to turn

on the modem router.

Power On DSL On

Verify that the following LEDs

turn stable before continuing

with the conguration.

Notes:

2. We recommend that the outside

two antennas be outward at about

30 degrees.

1. The DSL LED takes about 1 to 2

minutes to stabilize.

30° 30°

Power LAN2LAN1 LAN3 LAN4/WAN

DSL

Power LAN2LAN1 LAN3 LAN4/WAN

DSL

SSID: TP-Link_XXXX

SSID: TP-Link_XXXX_5G

Password: XXXXXXXX

Flip the page over to know more.

Method 2: Via TP-Link Tether App

Note: If you don’t have an account, create one rst.

2. Open the Tether app and log in with your TP-Link ID.

1. Download the TP-Link Tether app.

Scan for Tether Tether

3. Tap the button in the Tether app and select Router > DSL

Modem Router. Follow the steps to complete the setup and

connect to the internet.

Turn off the Wi-Fi on your computer and connect it to the router

via an Ethernet cable.

Wired

Find the Wi-Fi Info Card in the package.

Use the default network names (SSIDs) and password to join

the network.

Wireless

Choose your device type

Archer AX11000

Archer C5400X

Range Extender

Router

You'll usually need an internet service username and password, given to you by your internet service provider (ISP) when you first signed up with them. If you are unsure, please check with your ISP.

Summary of content (2 pages)

PAGE 1
.Connect the Hardware Phone Jack Quick Installation Guide Wireless MU-MIMO VDSL/ADSL Modem Router Power Adapter 5 Attach the antennas. Verify that the following LEDs turn stable before continuing with the configuration. Phone Cable Power On 2 Power LAN1 LAN2 LAN3 LAN4/WAN Power Power LAN1 LAN2 4 Push in the Power button LINE *Images may differ from actual product. 1 on the side panel to turn on the modem router.
PAGE 2
Already have a modem? USB Applications If you already have a modem or your internet comes directly from an Ethernet wall outlet, you can switch to Wireless Router mode. Follow the steps below to set up. USB port can be used for file and media sharing, both locally over your home network and remotely over the internet using the router's built-in FTP server capability. It also allows 3G/4G connection as a backup solution for internet access. 1. Power on the router. USB Port 2.