Installation Instructions

Quick Installation Guide

AC750 Wireless Dual Band Gigabit

VDSL2 Modem Router

7106505441 REV1.0.0

Connecting the Hardware

DSL Splitter

Phone Jack

Connect to the phone (Optional)

Power Adapter

1 Connect the DSL splitter

to the phone jack.

2 Connect the modem router

to the DSL splitter.

Modem Router

3 Turn on the modem router.

Verify that the hardware connection

is correct by checking these LEDs.

Note:

1. The DSL LED takes about 1 to 2 minutes to stabilize.

2. If the 2.4GHz LED and 5GHz LED are oﬀ, please press the Wi-Fi

button on the rear panel for 2 seconds, then check the LEDs again in a

few seconds.

Power On

On5GHzOn2.4GHzOnDSL

If you don’t need the phone service, just directly connect the modem router to

the phone jack with a phone cable, then follow steps 3 and 4 to complete the

hardware connection.

PAGE 1
Quick Installation Guide AC750 Wireless Dual Band Gigabit VDSL2 Modem Router Power Adapter 7106505441 REV1.0.0 Connecting the Hardware If you don’t need the phone service, just directly connect the modem router to the phone jack with a phone cable, then follow steps 3 and 4 to complete the hardware connection. Modem Router Phone Jack 3 Turn on the modem router. 1 Connect the DSL splitter to the phone jack. 2 Connect the modem router to the DSL splitter.
PAGE 2
Configuring the Modem Router 1. Connecting your computer to the modem router (Wired or Wireless) Wired USB Features FAQ (Frequently Asked Questions) Use the USB ports for media sharing, storage sharing and printer sharing across your local network. You can also setup an FTP server to access your files remotely through the Internet. Ethernet cable USB Ports Connect wirelessly by using the SSID (network name) and Wireless Password printed on the product label at the back of the modem router.