Quick Start Guide

Check the following LEDs’ status. If the Internet LED is on, your router is connected

to the internet successfully.

Quick Installation Guide

Wireless 4G LTE Router

1. Connect the Hardware

3. Enjoy the Internet2. Verify the Hardware Connection

Images may dier from actual products.

Note: If the Internet LED does not turn on, please refer to Q2 of Need Help? in this guide.

Power

Internet

Wi-Fi

For better internet connection, make sure 2 or 3 bars of the Signal Strength LED

are lit. Otherwise, try relocating the router to a spot that may receive a stronger mobile

network signal, such as near a window.

Wired

Wireless

Connect your computers to the router's LAN ports via Ethernet cables.

Find the SSIDs (network names) and wireless password printed on the label at the

bottom of the router.

Click the network icon of your computer or go to Wi-Fi settings of your smart device,

and then select the SSID to join the network.

Power adapter

Router

Wireless Password/PIN:XXXXXXXXX

SSID:TP-Link_XXXX

SSID:TP-Link_XXXX_5G

b. Insert the Micro SIM

card into the slot

until you hear a click.

a. Install the antennas

and position them

upwards.

c. Connect the

power adapter

and turn on the

router.

SIM card requirement

Micro SIM card

Nano SIM card + Provided SIM card adapter + Provided sticker

+ +

Standard

SIM card

PAGE 1
. Connect the Hardware Quick Installation Guide a. Install the antennas and position them upwards. Power adapter b. Insert the Micro SIM card into the slot until you hear a click. Wireless 4G LTE Router c. Connect the power adapter and turn on the router. Images may differ from actual products. ©2019 TP-Link 7106508307 REV1.0.0 Power On Internet On ! SIM card requirement Micro SIM card 2. Verify the Hardware Connection Check the following LEDs’ status.
PAGE 2
Customize the 4G LTE Router Tether App 1. Make sure your computer is connected to the router (wired or wireless). The TP-Link Tether app provides a simple, intuitive way to access and manage your router. 2. Launch a web browser and type in http://tplinkmodem.net or http://192.168.1.1. Create a new password for future logins. Block unwelcome users from connecting to your network Note: If the login page does not appear, please refer to Q1 of Need Help? in this guide.