Quick Start Guide

TL-MR6400 User Guide
-83-
5.5 Network
There are four submenus under the Network menu: WAN, MAC Clone, LAN and VLAN. Click
any of them, and you will be able to configure the corresponding function.
5.5.1 WAN
Go to Network →
WAN, and you can configure the IP parameters of the WAN on the screen
below.
1. If your ISP provides the DHCP service, please choose Dynamic IP type, and the router will
automatically get IP parameters from your ISP. You can see the page as follows:
This page displays the WAN IP parameters assigned dynamically by your ISP, including IP
address, Subnet Mask, Default Gateway, etc. Click Renew to renew the IP parameters
from your ISP. Click Release to release the IP parameters.