Quick Start Guide

TL-MR6400 User Guide
-72-
 SysContact - The textual identification of the contact person for this managed node.
 SysName - An administratively-assigned name for this managed node.
 SysLocation - The physical location of this node.

Note:
Specifying one of these values via the Device's web management page makes the corresponding
object read-only. If there isn't such a config setting, then the write request will succeed (assuming
suitable access control settings), but the new value would be forgotten the next time the agent
was restarted.
 Get Community - Enter the community name that allows Read-Only access to this device's
SNMP information. The community name can be considered a group password. The
default setting is public.
 Get Source - Get source defines the IP address or subnet for management systems that
can read information from this 'get' community device.
 Set Community - Enter the community name that allows Read/Write access to this device's
SNMP information. The community name can be considered a group password. The
default setting is private.
 Set Source - Set source defines the IP address or subnet for management systems that
can control this 'set' community device.

Note:
A restricted source can be a specific IP address (e.g. 10.10.10.1), or a subnet - represented as
IP/BITS (e.g. 10.10.10.0/24). If an IP Address of 0.0.0.0 is specified, the agent will accept all
requests under the corresponding community name.
Click Save to make the settings effective.
4.17.2 Time Settings
Go to System Tools →
Time Settings, and then you can configure the time on the following
screen.