Manualshelf

Quick Start Guide

ManualsBrandsTP Link ManualsElectricalArcher D2 AC750 Wireless Dual-Band Gigabit ADSL 2+ Modem Router
71727374757677787980
TL-MR6400 User Guide
-65-
4.14 Advanced Routing
There are two submenus under the Advanced Routing menu: Static Routing List and System
Routing Table. Click any of them, and you will be able to configure the corresponding function.
4.14.1 Static Routing List
Go to Advanced Routing →
Static Routing List, you can configure the static route in the next
screen. A static route is a pre-determined path that network information must travel to reach a
specific host or network.
To add static routing entries:
1. Click Add New…
, you will see the following screen.
2. Enter the following data:
Destination Network - The Destination Network is the address of the network or host
that you want to assign to a static route.
Subnet Mask - The Subnet Mask determines which portion of an IP Address is the
network portion, and which portion is the host portion.