Quick Start Guide

TL-MR6400 User Guide
-47-
2. Select a common application from the Common Applications drop-down list, then the
Trigger Port field and the Incoming Ports field will be automatically filled. If the Common
Applications do not have the application you need, enter the Trigger Port and the Incoming
Ports manually.
3. Select the protocol used for Trigger Port from the Trigger Protocol drop-down list, either
TCP, UDP, or All.
4. Select the protocol used for Incoming Ports from the Incoming Protocol drop-down list,
either TCP or UDP, or All.
5. Select Enable in Status field.
6. Click Save to save the new rule.
To modify an existing entry:
1. Click the Modify in the entry you want to modify.
2. Modify the information.
3. Click Save.
Click Delete in the entry you want to delete to delete an existing entry.
Click Enable All to make all entries enabled
Click Disable All to make all entries disabled.
Click Delete All to delete all entries.
Click Next n to go to the next page and click Previous to return the previous page.

Note:
1) When the trigger connection is released, the according opening ports will be closed.
2) Each rule can only be used by one host on the LAN at a time. The trigger connection of other
hosts on the LAN will be refused.
3) Incoming Port Ranges cannot overlap each other.