Quick Start Guide

TL-MR6400 User Guide
-41-
 Sent Packets - Packets sent by the station.
 Configure - The button is used for loading the item to the Wireless MAC Filtering list.
Deny: if the Wireless MAC Filtering function enable, deny the station to access.
Allow: if the Wireless MAC Filtering function enable, allow the station to access.
You cannot change any of the values on this page. To update this page and to show the
current connected wireless stations, click Refresh.
If the numbers of connected wireless stations go beyond one page, click Next to go to the next
page and click Previous to return to the previous page.
 Note:
This page will be refreshed automatically every 5 seconds.
4.9 DHCP
There are three submenus under the DHCP menu: DHCP Settings, DHCP Client List and
Address Reservation. Click any of them, and you will be able to configure the corresponding
function.
4.9.1 DHCP Settings
Go to DHCP → DHCP Settings, and then you can configure the DHCP Server on the page.
The router is set up by default as a DHCP (Dynamic Host Configuration Protocol) server, which
provides the TCP/IP configuration for all the PC(s) that are connected to the router on the LAN.