Quick Start Guide

TL-MR6400 User Guide
-34-
 Wireless Password - You can enter ASCII or Hexadecimal characters. For Hexadecimal,
the length should be between 8 and 64 characters; for ASCII, the length should be
between 8 and 63 characters.
 Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
Click Save to make the settings effective.
 WPA /WPA2 - Enterprise - It’s based on Radius Server.
 Version
- you can choose the version of the WPA security on the pull-down list. The
default setting is Automatic, which can select WPA (Wi-Fi Protected Access) or WPA2
(WPA version 2) automatically based on the wireless station's capability and request.
 Encryption -
You can select either Automatic, or TKIP or AES.

Note:
If you check the WPA/WPA2 - Enterprise radio button and choose TKIP encryption, you will
find a notice in red as shown below.
 Radius Server IP - Enter the IP address of the Radius Server.
 Radius Port - Enter the port that radius service used.
 Radius Password - Enter the password for the Radius Server.
 Group Key Update Period - Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
 WEP - It is based on the IEEE 802.11 standard. If you select this check box, you will find a
notice in red as show below.