Quick Start Guide

TL-MR6400 User Guide
-25-
 PAP - Password Authentication Protocol. This protocol allows the device to establish
authentication with the peer using two handshakes. Select this option if the ISP
requires this authentication type.
 CHAP - Challenge Handshake Authentication Protocol. This protocol allows the device
to establish authentication with the peer using three handshakes and checking the
peer identity periodically. Select this option if the ISP requires this authentication type.
Click Delete to delete a profile.
Click Create to create a new profile.
Click Save to make the settings effective.
4.5.2 LTE Data Settings
Go to Network →
LTE Data Settings, you can configure data settings on this page.
 Total/Monthly Used - Total/Monthly data used. You can click Correct and input the actual
data amount to correct the data.
 Data Limit - You can enable or disable the function of data limit. If enabled, you can set the
data quota and usage alert.
 Total/Monthly Allowance - Set the allowed amount of total/monthly data. When data usage
exceeds the allowance, the device will disconnect internet and display a message on the
screen asking whether to connect internet.
 Monthly Data Statistic - You can enable or disable the function of traffic data resetting.
 Start Date - Enable the function and schedule a date, the data will reset to zero on the date.
If disabled, total data information is displayed. If enabled, monthly data information is
displayed.
Click Save to make the settings effective.