Quick Start Guide

TL-MR6400 User Guide
-23-

Note:
1) The WPS LED on the router will light for five minutes if the device has been successfully added to
the network.
2) The WPS function cannot be configured if the wireless function of the router is disabled. Please
make sure the Wireless Function is enabled before configuring the WPS.
4.4 Working Mode
 Standard Wireless Router - In this mode, this device will only use LAN/WAN port to access
internet. The inner hosts can access internet via 3 LAN ports or wireless.
 3G/4G Router - In this mode, this device enables multiusers to share internet via 3G/4G
modem. The LAN/WAN port acts the same as a LAN port while at 3G/4G Router mode.
Click Save to make the settings effective.

Note:
The router will reboot automatically after you click Save.
4.5 Network
There are four submenus under the Network menu: LTE Dial Up, LTE Data Settings, PIN
Management and LAN. Click any of them, and you will be able to configure the corresponding
function.
4.5.1 LTE Dial Up
Go to Network →
LTE Dial Up, you can configure dial-up settings on this page.