Quick Start Guide

TL-MR6400 User Guide
-17-
 Wireless Radio - Enable or disable the wireless function.
 Wireless Network Name - Enter a string of up to 32 characters. The same name of
SSID (Service Set Identification) must be assigned to all wireless devices in your
network. Considering your wireless network security, the default SSID is set to be
TP-Link_XXXX (XXXX indicates the last unique four numbers of each router’s MAC
address). This value is case-sensitive. For example, TEST is NOT the same as test.
 Disable Security - The wireless security function can be enabled or disabled. If
disabled, the wireless stations will be able to connect the router without encryption. It
is recommended strongly that you choose one of following options to enable security.
 WPA-PSK/WPA2-PSK – Select WPA-PSK/WPA2-PSK based on pre-shared
passphrase.
 Wireless Password - You can enter ASCII or Hexadecimal characters.
For ASCII, the key can be made up of any numbers 0 to 9 and any letters A to Z,
the length should be between 8 and 63 characters.
For Hexadecimal, the key can be made up of any numbers 0 to 9 and letters A to F,
the length should be between 8 and 64 characters.
Please also note the key is case sensitive, this means that upper and lower case
keys will affect the outcome. It would also be a good idea to write down the key
and all related wireless security settings.
 No Change - If you chose this option, wireless security configuration will not change.
These settings are only for basic wireless parameters. For advanced settings, please refer
to 4.7 Wirelss
.
11. Click Finish to complete the Quick Setup.