Quick Start Guide

TL-MR6400 User Guide
-6-
1. Install the 4G LTE antennas and position them upwards.
2. Insert the SIM card into the slot until you hear a click.

Note:
A micro or nano SIM card must be converted using the SIM card adapter provided.
3. Connect the power adapter to the router and push in to turn on the router.
4. Verify the hardware connection by checking the following LEDs’ status. If the Internet LED
is on, your router is connected to the internet successfully.

Note:
For better internet connection, make sure 3 or 4 bars of the Signal Strength LED
are lit.
Otherwise, try relocating the router to a location that may receive a stronger mobile internet
signal, such as near a window.
b. Standard Wireless Router Mode
Before installing the router, make sure your PC is connected to the internet through the
broadband service successfully. If there is any problem, please contact your ISP. After that,
please install the router according to the following steps. Don't forget to pull out the power plug
and keep your hands dry.