Quick Start Guide

TL-MR6400 User Guide
-115-

Note:
The firmware version must correspond to the hardware. The upgrade process takes a few moments
and this device restarts automatically when the upgrade is complete. It is important to keep power
applied during the entire process. Loss of power during the upgrade could damage this device.
5.18.5 Factory Defaults
Go to System Tools →
Factory Defaults, and you can restore the configurations of the router to
factory defaults on the following screen.
Click Restore to reset all configuration settings to their default values.
 The default User Name: admin
 The default Password: admin
 The default IP Address: 192.168.1.1
 The default Subnet Mask: 255.255.255.0

Note:
All changed settings will be lost when defaults are restored.
5.18.6 Backup & Restore
Go to System Tools →
Backup & Restore, you can save the current configuration of the router
as a backup file and restore the configuration via a backup file.
 Click Backup to save all configuration settings to your local computer as a file.
 To restore this device's configuration, follow these instructions:
3) Click Choose File to find the configuration file which you want to restore.
4) Click Restore to update the configuration with the file whose path is the one you have
input or selected in the blank.

Note: