Quick Start Guide

TL-MR6400 User Guide
-105-
 Line Type - Select the right type for you network connection. If you don’t know how to
choose, please ask your ISP for the information.
 Egress Bandwidth - The upload speed through the WAN port.
 Ingress Bandwidth - The download speed through the WAN port.
5.14.2 Rule List
Go to Bandwidth Control →
Rule List, and then you can view and configure the Bandwidth
Control rules in the screen below.
 Description - The information of description include address range, the port range and
protocol of transport layer.
 Egress Bandwidth - The max upload speed which through the WAN port, default number is
0.
 Ingress Bandwidth - The max download speed which through the WAN port, default
number is 0.
 Enable - Rule status, show whether the rule takes effect.
 Modify - Click Modify to edit the rule. Click Delete to delete the rule.
To add/modify a Bandwidth Control rule, follow the steps below.
1. Click Add New…
, you will see a new screen as shown below.
2. Enter the information like the screen shown below.