Quick Start Guide

TL-MR6400 User Guide
-3-
(Wireless)
On
The wireless function is enabled.
Off
The wireless function is disabled.
(LAN)
On
At least one LAN port is connected to a powered-on device.
Off
No LAN port is connected to a powered-on device.
(WPS)
On/Off
This light remains on for 5 minutes when a WPS connection is
established, then turns off.
Flashing
WPS connection is in progress. This may take up to 2 minutes.
(Signal
Strength)
On
Indicates the signal strength received from the mobile internet
network. More lit bars indicate a better signal strength.
Off
There is no mobile internet signal.
1.2.2 Ports and Buttons
The following parts are located on the rear panel (View from left to right).
Status
Indication
POWER
The power socket is where you will connect the power adapter. Please
use the power adapter provided.
POWER ON/OFF
The switch for the power.
LAN (1, 2, 3)
These ports (1, 2, 3) connect the router to the local PC(s).
LAN4/WAN
This port can be LAN or WAN port depending on the working mode.
WPS/RESET
The switch for the WPS function or resetting the modem router. Refer to
the note below for more information.
WiFi ON/OFF
This switch is used to enable/disable the router’s wireless function.
SIM Card
Insert the SIM card into the slot.