User Guide
Table Of Contents
- About This Guide
- Get to Know About Your Router
- Connect to the Internet
- Log In
- Configure the Router in Wireless Router Mode
- 4. 1. Status
- 4. 2. Quick Setup
- 4. 3. Operation Mode
- 4. 4. Network
- 4. 5. Dual Band Selection
- 4. 6. Wireless (2.4GHz or 5GHz)
- 4. 7. Guest Network
- 4. 8. DHCP
- 4. 9. Forwarding
- 4. 10. Security
- 4. 11. Parental Controls
- 4. 12. Access Control
- 4. 13. Advanced Routing
- 4. 14. Bandwidth Control
- 4. 15. IP & MAC Binding
- 4. 16. Dynamic DNS
- 4. 17. IPv6
- 4. 18. System Tools
- 4. 19. Log Out
- Configure the Router in Access Point Mode
- FAQ
56
Chapter 4 Congure the Router in Wireless Router Mode
• WAN - This section shows the current IPv6 information of the router’s Internet port,
including Connection Type, Connection Status, IPv6 Address information, IPv6
Default Gateway, Primary IPv6 DNS and Secondary IPv6 DNS.
• Connection Type - The IPv6 connection way for WAN.
• Connection Status - The status of IPv6 connection.
• IPv6 Address - The WAN IPv6 address.
• IPv6 Default Gateway - The router’s default gateway.
• Primary IPv6 DNS - The primary IPv6 DNS address.
• Secondary IPv6 DNS - The secondary IPv6 DNS address.
• IPv6 LAN - This section shows the current IPv6 information of the router’s LAN port,
including IPv6 Address Assign Type, Prefix Length and IPv6 Address.
• IPv6 Address Type - The way how the router assign IPv6 address for PC in LAN, SLAAC
(Stateless address autoconfiguration) and DHCPv6 (Dynamic Host Configuration
Protocol for IPv6) Server.
• Prefix Length - The length of IPv6 address prefix.
• IPv6 Address - The LAN global IPv6 address of the Router.
4. 17. 2. IPv6 WAN
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to IPv6 > IPv6 WAN.