User's Guide

40
Chapter 9
Network Security
3 ) Click Block above the Online Devices table. The selected devices will be added to
Devices in Blacklist automatically.
To allow specific device(s)
1 ) Select
Whitelist and click Save.
2 ) Click Add in the Devices in Whitelist section. Enter the Device Name and MAC
Address
(You can copy and paste the information from the Online Devices list if the
device is connected to your network).
3 ) Click OK.
Done!
Now you can block or allow specific client devices to access your network (via wired or
wireless) using the
Blacklist or Whitelist.
9. 3. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
network device’s IP address to its MAC address. This will prevent ARP Spoofing and