User's Guide

94
Chapter 5 &RQƮJXUHWKH5RXWHULQ$FFHVV3RLQW0RGH
• To restore configuration settings:
1. Click
Choose File to locate the backup configuration file stored in your computer, and
click
Restore.
2. Wait a few minutes for the restoring and rebooting.
Note:
During the restoring process, do not power off or reset the router.
5. 9. 8. Reboot
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
System Tools > Reboot, and you can restart your router.
3. Enable the auto reboot function as needed.
•
Disable - Disable the auto reboot function.
•
Timeout - Specify a time period(1-72 hours), then the router will reboot
automatically after every this interval.
•
Schedule - The router will reboot automatically according to a specific time
schedule.
Some settings of the router will take effect only after rebooting, including:
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Working Modes.
• Change the Web Management Port.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router to its factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically).
5. 9. 9. Password
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
System Tools > Administrator and locate the Account Management section.