User's Guide

69
Chapter 4 &RQƮJXUHWKH5RXWHULQ:LUHOHVV5RXWHU0RGH
Note:
• If your PC is blocked but you want to access the router again, press and hold the Reset button to reset
the router to the factory defaults.
• To access the router, enter your router’s WAN IP address in your browser’s address bar, followed by a
colon and the custom port number. For example, if your router’s WAN address is 202.96.12.8, and the
port number used is 8080, please enter http://202.96.12.8:8080 in your browser. Later, you may be asked
for the router’s password. After successfully entering the username and password, you will be able to
access the router’s web management page.
4. 18. 12. System Log
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
System Tools > System Log, and you can view the logs of the router.
• Log Type - By selecting the log type, only logs of this type will be shown.
•
Log Level - By selecting the log level, only logs of this level will be shown.
•
Refresh - Refresh the page to show the latest log list.
•
Clear Log - All the logs will be deleted from the router permanently, not just from the
page.
4. 18. 13. Statistics
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
System Tools > Statistics.
3. Enable
Traffic Statistics and click Save to get the network traffic of each PC on the
LAN.