User's Guide

Chapter 4 &RQƮJXUHWKH5RXWHULQ:LUHOHVV5RXWHU0RGH

Note:

If your PC is blocked but you want to access the router again, press and hold the Reset button to reset the router to the

factory defaults.

• Certificate

Download and install the certificate for management via HTTPS if you need it. Once the

certificate is installed, warnings will not pop up when you access the router via HTTPS.

4. 18. 11. Remote Management

1. Visit http://tplinkwifi.net, and log in with the password you set for the router.

2. Go to

System Tools > Administrator and locate the Service Configuration section.

• Forbid all devices to manage the router remotely:

Do not tick the

Enable checkbox of both the HTTP and HTTPS Service in Remote

Management

• Allow all devices or a specific device to manage the router remotely:

1. Enable

HTTP Service Port in the Remote Management. Enable HTTPS Service Port if

you also want to manage the router remotely via the internet.

2. Use the default value

HTTP Port: 80 and HTTPS Port: 443 or enter values between

1024 and 65535.

3. Enter the IP or MAC address in the

Available Host (IP/MAC) column to allow only this

specific device to manage the router remotely. Or leave it blank to allow all devices to

manage manage the router remotely.

• Certificate

Download and install the certificate for management via HTTPS if you need it. Once the

certificate is installed, warnings will not pop up when you access the router via HTTPS.