User's Guide

Chapter 4 &RQƮJXUHWKH5RXWHULQ:LUHOHVV5RXWHU0RGH

I want to:

Share my personal website I’ve built in local network with my friends through the internet.

For example, the personal website has been built in my home PC (192.168.0.100). I hope

that my friends on the internet can visit my website in some way. My PC is connected to

the router with the WAN IP address 218.18.232.154.

Router

WAN: 218.18.232.154

LAN

Home

Personal Website

1. Set your PC to a static IP address, for example 192.168.0.100.

2. Visit http://tplinkwifi.net, and log in with the password you set for the router.

3. Go to

Forwarding > Virtual Server.

4. Click Add New. Select HTTP from the Common Service Port list. The service port,

internal port and protocol will be automatically filled in. Enter the PC’s IP address

192.168.0.100 in the

IP Address field.

5. Leave the status as Enabled and click Save.

Note:

• It is recommended to keep the default settings of Internal Port and Protocol if you are not clear about

which port and protocol to use.

• If the service you want to use is not in the Common Service Port list, you can enter the corresponding

parameters manually. You should verify the port number that the service needs.

• You can add multiple virtual server rules if you want to provide several services in a router. Please note

that the Service Port should not be overlapped.

Done!

Users on the internet can enter http:// WAN IP (in this example: http:// 218.18.232.154)

to visit your personal website.

Note:

• If you have changed the default Service Port, you should use http:// WAN IP: Service Port to visit the

website.

• Some specific service ports are forbidden by the ISP, if you fail to visit the website, please use another

service port.