User's Guide

Chapter 4 &RQƮJXUHWKH5RXWHULQ:LUHOHVV5RXWHU0RGH

4. 3. 3. Range Extender Mode

In this mode, this device boosts the existing wireless coverage in your home. If you

already have a wireless router, you can use this mode.

1. Connect a computer to the router via an Ethernet cable or wirelessly by using the

SSID (network name) and Wireless Password printed on the label at the bottom of the

router. For details, refer to

Connect Your Router.

2. Visit

http://tplinkwifi.net, and log in with the password you set for the router.

3. Go to

Operation Mode.

4. Select the

Range Extender mode and click Save.

5. Relocate the router about halfway between your host router and the Wi-Fi “dead”

zone. The location you choose must be within the range of your existing host network.

Devices

Host Router New Router

Extended NetworkHost Network

WANRESET

WPS/

Wi-Fi

LAN1 LAN2 LAN3 LAN4 POWER

4. 4. Network

4. 4. 1. WAN

1. Visit http://tplinkwifi.net, and log in with the password you set for the router.

2. Go to

Network > WAN.

3. Configure the IP parameters of the LAN and click

Save.

Dynamic IP

If your ISP provides the DHCP service, please select Dynamic IP, and the router will

automatically get IP parameters from your ISP.

Click

Renew to renew the IP parameters from your ISP.

Click

Release to release the IP parameters.