User's Guide

102
Chapter 6
Configure the Router in Range Extender Mode
2. Visit http://tplinkwifi.net, and log in with the password you set for the router.
3. Go to
Operation Mode.
4. Select the
Range Extender mode and click Save.
5. Relocate the router about halfway between your host router and the Wi-Fi “dead”
zone. The location you choose must be within the range of your existing host network.
Devices Host Router New Router
Extended NetworkHost Network
WANRESET
WPS/
Wi-Fi
LAN1 LAN2 LAN3 LAN4 POWER
6. 4. Network
1. Visit http://tplinkwifi.net, and log in with the password you set for the router.
2. Go to
Network > LAN.
3. Configure the IP parameters of the LAN and click
Save.
• LAN Type - Select Smart IP(DHCP) to get IP address from DHCP server, or select
static IP to configure IP address manually.
Note: If you select the type of smart IP(DHCP), the IP parameters will be automatically configured. And the
DHCP server in this device will not startup.
• MAC Address - The physical address of the LAN ports. The value can not be changed.
•
IP Address - Enter the IP address in dotted-decimal notation of your router.